© 2014 Pentair Equipment Protection
89074139
- 16 -
ETHERNET COMMUNICATION MODE
• From
Tools
menu select
Use Ethernet
• When
Use Ethernet
is checked,
Comm Port
selection is disabled,
Device IP
and
Community
boxes are shown and
Ethernet communication can be used.
• Enter unit’s IP Address and Community string in
Device IP
and
Community
boxes at the bottom of the PC Interface
Tool.
Each unit has two community strings. One is a Read/Write community string (defaulted to
‘private’) that can be changed by the customer (must be 4 to 8 characters long). The other is a
Read-Only community string (‘public’) and cannot be changed.
VIEWING AIR CONDITIONER UNIT VALUES
To view Air Conditioner Unit values
• Select the
ACU Values
tab
• Select the
Enable Comm
button (the PC Interface will now be communicating with unit)
• To stop communication select the
Disable Comm
button
CHANGING AIR CONDITIONER UNIT VALUES
To change
ACU Values
• Select the
Settings
tab
• Select the value to change
• Make the change to the value
• Select the
Change Setting
button
• Change can be verified in
ACU Values
tab
VIEWING AND CHANGING ETHERNET INFORMATION
To view and change Ethernet Information
• Select
Ethernet Info
tab
To view Ethernet Information
• Click
Read Ethernet Info
button
To change to dynamically assigning IP Address Mode
• Check
Use DHCP Server
checkbox
• Enter Trap IP Address and Community
• Click
Load Ethernet Info
button
To change to statically assigning IP Address Mode
• Uncheck
Use DHCP Server
checkbox
• Enter Device IP Address, Subnet Mask, Gateway IP Address, Trap IP Address and Community
• Click
Load Ethernet Info
button
ALARM LOG ACCESSIBLE WITH SNMP
• Using custom software with the provided MIB file gives the ability to view a log of the last 25 alarms