SCREENLOGIC
®
INTERFACE Wireless Connection Kit Installation Guide
1
ScreenLogic
®
Interface Wireless Connection Kit Overview
The ScreenLogic
®
Interface Wireless Connection interface consists of an
indoor and outdoor wireless 902-928 MHz wireless transceiver.
Note: The wireless transceivers ship from the factory as a matched pair.
The ID numbers on each transceiver must be the same number to function
correctly. If needed, the transceivers are replaced as a matched pair . For
more information, call Customer Support (880) 831.7133.
The indoor and outdoor transceivers provide a wireless connection
between the ScreenLogic Interface Protocol adapter and the IntelliTouch
®
or EasyTouch
®
Control System Load Center located at the equipment pad.
This wireless connection eliminates the existing hard wire connection from
inside your home to the equipment pad.
4X
Mounting hardware
2X
Outdoor
Transceiver
enclosure
Indoor transceiver and base
AC transformer
Outdoor Cable
(white - 10 ft.)
NOTE (*): ID numbers
on Indoor and Outdoor
transceiver board must
match
Indoor hardware
Cable (for connection to
ScreenLogic
®
Interface
Protocol Adapter
(purchased separately)
2X
4X
2X
In this Installation Guide
This Installation Guide provides installation instructions for the ScreenLogic
®
Interface Wireless Connection kit.
•
For the ScreenLogic Interface system operating instructions, refer to the
ScreenLogic Interface User’s Guide (P/N 520493)
SCREENLOGIC INTERFACE
®
ScreenLogic Interface
Protocol Adapter
(purchased separately)
ScreenLogic Interface Wireless Connection Kit Contents
Wireless Connection Kit Contents
The following items are included in the Wireless Connection kit:
•
One ScreenLogic Interface indoor wireless transceiver with AC power
adapter and 1 ft. long cable with attached plugs.
•
One ScreenLogic Interface outdoor wireless transceiver with
10 ft. cable, enclosure and mounting hardware.
•
ScreenLogic Interface Wireless Connection Installation Guide
(this manual).
