background image

4 / 4

THERMAL BUILDING SOLUTIONS

EN-RaychemFrostGuard240V-IM-H59487     05/16            

PN P000002073

WWW.PENTAIRTHERMAL.COM

©2016 Pentair. 

NORTH AMERICA 

Tel: +1.800.545.6258

Fax: +1.800.527.5703

Tel: +1.650.216.1526

Fax: +1.650.474.7711

[email protected]

Pentair and FrostGuard are owned by Pentair or its global affiliates. All other trademarks are the property of their respective owners. Pentair reserves the 

right to change specifications without prior notice.

Product Specifications

FG2-6L

FG2-12L

FG2-18L

FG2-24L

Cable length (ft/m)

6 (1.8)

12 (3.7)

18 (5.5)

24 (7.3)

Min. thermal output on a pipe at 40°F/4°C (watts)

30

60

90

120

Min. thermal output on a pipe at 0°F/–18°C (watts)

46

92

138

184

Max. current draw on a pipe at 40°F/4°C (amps)

0.21

0.43

0.64

0.85

Max. current draw on a pipe at 0°F/–18°C (amps)

0.32

0.64

0.96

1.28

General Specifications for all FG2 Products

Maximum cable width (inch/mm)

0.45 (11.4)

Maximum cable thickness (inch/mm)

0.24 (6.1)

Heating cable bus wire gauge (AWG)

16

Voltage rating (Vac)

208–240

Circuit breaker size

15 A max.

Cold lead length (ft/m)

6 (1.83)

Maximum exposure temperature

150°F (65°C)

Minimum installation temperature

5°F (–15°C) 

Minimum bend radius (inch/mm)

5/8 (16)

Electrical classification

Nonhazardous areas only

Exposure to chemicals

None

Содержание Raychem FrostGuard 240 V

Страница 1: ...eave these installation instructions with the user for future reference WARNING APPROVALS W HEATING CABLE SELECTION FrostGuard 240 V FG2 heating cable selection for pipe freeze protection Use the tables to the right to select the correct heating cable Round up to the next pipe size if your pipe diameter isn t shown The charts assume the lowest ambient temperature is 20 F 29 C with a minimum of 1 2...

Страница 2: ...ble it back along the pipe and cover it with insulation Provide extra heat at valves and spigots by wrapping each with an additional foot of heating cable overlapping as re quired GENERAL REQUIREMENTS FrostGuard heating cables are not intended for use inside any pipes for freeze protection of liquids other than water or for use in classified hazardous locations FrostGuard heating cables may be use...

Страница 3: ...ssible Be sure the FrostGuard 240 V label is visible on the out side of the thermal insulation Connecting the FrostGuard cable to power Using the three wire connectors included in the kit connect the black and white cold leads to both phase wires and the green cold lead to ground Provide suitable UL Listed and CSA Certified junction box and outlet bushing and fitting CABLE TESTING AND MAINTENANCE ...

Страница 4: ...m 6 1 8 12 3 7 18 5 5 24 7 3 Min thermal output on a pipe at 40 F 4 C watts 30 60 90 120 Min thermal output on a pipe at 0 F 18 C watts 46 92 138 184 Max current draw on a pipe at 40 F 4 C amps 0 21 0 43 0 64 0 85 Max current draw on a pipe at 0 F 18 C amps 0 32 0 64 0 96 1 28 General Specifications for all FG2 Products Maximum cable width inch mm 0 45 11 4 Maximum cable thickness inch mm 0 24 6 1...

Отзывы: