Pentair Nuheat Signature, Руководство по эксплуатации

Страница: 12 / 24

12
THERMAL BUILDING SOLUTIONS
SECTION 2: SETUP/PREFERENCES
Section 2.7 Temperature Display
The thermostat can display either of the
following temperatures on the
home screen and screensaver:
Floor temp. (default)
Air/Room temp.
Press
Cancel
to ignore the change
or press
Save
to confirm.
Section 2.8 Floor Type
Section 2.9 Early Start
Set according to your flooring type.
When
Engineered/Laminate is
selected, the floor temperature will be
limited to 82°F / 28°C.
NOTE: This setting is not available if
Temperature Control is set to
Air/Room temp. Refer to section 2.6
on page 11 .
Press Cancel to ignore the change
or press Save to confirm.
Early Start calculates the optimal time
to start heating to ensure your floor
reaches the desired temperature at
the scheduled time in your program/
schedule. It only applies if your
thermostat is following a programmed
schedule (ie. thermostat is
in
Auto mode).
Press Cancel to ignore the change
or press
Save
to confirm.
•
•