background image

26

1.5.1 PERSONNEL QUALIFICATION

Qualification and protection restrictions foreseen for the operators.

OPERATOR

QUALIFICATION

RECCOMENDED INDIVIDUAL PROTECTION MEAN

CaRRIeR

Knowledge and command of the chapters:

• 

General information

• 

Description

• 

Installation

Protective shoes and gloves.

InStaLLeR

Qualification complying with the provisions of the Country of installation,

knowledge and command of the chapters:

• 

General information

• 

Description

• 

Installation

Protective shoes and gloves.

USeR

Knowledge and command of the chapters:

• 

General information

• 

Description

• 

Use

Protective shoes and gloves, high temperature protecting overall and gloves.

MaIntenanCe Man

Fitness acknowledged by PentaIR InteRnatIonaL Sarl, knowledge and

command of the chapters:

• 

General information

• 

Description

• 

Maintenance

Protective shoes and gloves.

DeMoLISHeR

Knowledge and command of the chapters:

• 

General information

• 

Description

• 

Dismantling

Protective shoes and gloves.

GB

PENTAIR INTERNATIONAL S.a.r.l. shall not be liable for accidents if the machine is used from non qualified or 

unauthorised personnel and originating from the failure to follow the instructions contained in this manual and present 

on the machine board.

NOTE

The machine operates in safety conditions if it is used by qualified personnel in accordance with the instructions and 

information contained in this manual and present on board.

All the operations referred to in this manual should be performed by qualified personnel equipped with the protection 

means described in this manual.

DANGER

Содержание Nocchi VLR 16




























Отзывы: