7
PROWLER
®
820 and 830 Installation and User’s Guide
Removing the Cleaner
•
Slowly and gently pull on the cord, up to about 4 in. (10 cm) from the cord base, in order to get
the cleaner close to you.
•
Use both hands to remove the cleaner from the pool.
•
Avoid pulling the cleaner out of the pool by the cord only.
The cleaner will shut off automatically at the end of a cleaning cycle. Follow the steps below to remove the
cleaner from the pool.
•
Disconnect the power supply cable from the electrical outlet. Disconnect the cable from the
power supply.
•
Turn cleaner on its side to drain water after use.
•
Store the cleaner on the caddy with the cable coiled when not in use.
4 inch
10 cm
B
C
C
A
10 cm
3.93 inch
4 inch
10 cm
