Pentair iS4 Скачать руководство пользователя страница 4

iS4

 

Spa Side Remote Installation and User’s Guide

1

iS4 Spa-Side Remote Control

The iS4 Spa-Side Control can be used with the Pentair

®

 IntelliTouch

®

EasyTouch

®

 Control Systems and the Compool

®

 CP series Control Systems 

to provide remote switching of four control circuits from the spa location.  It 
is typically used for activating spa circulation and three auxiliary pieces of 
equipment (such as lights, jet pump, air blower, etc.). One iS4 spa-side control 
can be installed per control system. It is possible to install two iS4 remotes on 
a single control system, however, the two iS4 remotes will mirror each other 
in functionality. The iS4 spa-side remote is a double-insulated device UL and 
ETL listed to UL 1563. It is splash-proof and weatherproof but should not be 
permanently submerged below the spa water level.  The iS4 remote must be 
installed above the highest sustained water level. 

The iS4 Spa-Side Remote red LED status light functions are as follows:

 

Spa 

Mode 

N/A 

Steady Steady Steady 

 

Heating 

 

N/A N/A Flashing 

Flashing 

When used with any Pentair Control System:
Voltage:   

5 VDC

Current:   

2 mA maximum

iS4 Kit Contents
 

· Spa-side remote (with cable attached)

 

· iS4 Mounting Adapter (for acrylic spa and upgrade from SS4)

 

· Label Set

iS4 Required Mounting Space 

To install the iS4 Spa-Side Remote into the wall of a gunite spa, provision must 
be made while the spa is being plumbed.  For surface mounting (protruding 
from deck, tile or uneven surface), When installed, the iS4 remote requires the 
following space:
 

Flat Faceplate:   

6-1/2”  x  3-1/2” 

 

Skirted Faceplate: 

6”  x  2-5/8” x 1-1/4” high 

 Material:  ABS 

plastic

OVERVIEW

INSTALLATION

The iS4 spa-side remote is a double-insulated, waterproof device for installation at the 
water’s edge.  It is typically installed at the tile-line of the spa wall, or in the deck within 
arm’s reach of  a spa occupant.  It can be used with a gunite spa, acrylic spa, or hot-tub.  
However, in order to install the spa-side remote into the wall of a gunite spa, provision 
must be made while the spa is being plumbed.

Содержание iS4









Отзывы: