11
REGULATION (ELECTRONIC CONTROL UNIT)
Cooling mode
Heating mode
Defrosting
Access to internal
parameters
Pressing simultaneously for 3 sec locks/unlocks the keyboard
- Start/Stop:
When the HP is stopped but powered up, the display indicates “Standby”
- Operating modes:
Press the Mode button
-
ECO-SILENCE heating or cooling mode: the most economical and silent.
The HP varies the component speed to maintain an optimum sounds level and yield.
Use of 30% to 60% of the power. The COP and sound level are prioritised, the fan works at min. speed
and the compressor runs to optimise the COP.
- SMART heating or cooling mode: the most intelligent mode adapts to your requirements and to the environment.
The HP varies the speed of the components to maintain an optimum power/sound level ratio.
Use of 30% to 100% of the power. The power and sound level automatically adjust depending on the
external temperature and the temperature of your pool water.
- BOOST heating or cooling mode: maximum HP power.
The HP can vary the component speed to maintain maximum power.
Use of 85% to 100% of the power to quickly increase the temperature.
(AUTO/COOLING/HEATING) MODE
Automatic mode
(heating or cooling)
Keyboard locked
Internal parameters
ON/OFF
If the device is operating, it can take a few
minutes to shut it down.
Functioning of the HP
Water flow indicator
Fan indicator
Compressor indicator
–
Time setting:
–Press SET once (the hour flashes)
–Set the time using the up/down keys.
–Press SET once (the minutes flash)
–Set the minutes using the up/down keys.
–Press SET once to confirm.
–
Setting of the instruction temperature:
–Select the desired mode for the device (see paragraph above)
–Press on the Up key, the display indicates “SET” and the
instruction value
–Adjust the desired value using the up/down keys and wait a few sec-
onds, the value is recorded automatically.
