Pentair Hypro ARAG 520005, Инструкция по эксплуатации и каталог запасных частей

Страница: 20 / 20

375 Fifth Avenue NW • New Brighton, MN 55112 USA
Phone: (651) 766-6300 • 800-424-9776 • Fax: 800-323-6496
w w w. h y p r o p u m p s . c o m
Hypro (6/13)
Printed in USA
Hypro warrants to the original purchaser of its products (the “Purchaser”) that such products will be free from defects in material and
workmanship under normal use for the period of one (1) year for all Hypro/ARAG controls, which includes all consoles, wiring, manual
and electrical valves. “Normal use” does not include use in excess of recommended maximum speeds, pressures, vacuums and
temperatures, or use requiring handling of fluids not compatible with component materials, as noted in Hypro product catalogs,
technical literature, and instructions. This warranty does not cover freight damage, freezing damage, normal wear and tear, or damage
caused by misapplication, fault, negligence, alterations, or repair that affects the performance or reliability of the product.
THIS WARRANTY IS EXCLUSIVE. HYPRO MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED, INCLUDING BUT NOT
LIMITED TO ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
Hypro’s obligation under this warranty is, at Hypro’s option, to either repair or replace the product upon return of the entire product to
the Hypro factory in accordance with the return procedures set forth below.
THIS IS THE EXCLUSIVE REMEDY FOR ANY BREACH
OF WARRANTY.
IN NO EVENT SHALL HYPRO BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES OF ANY KIND, WHETHER
FOR BREACH OF ANY WARRANTY, FOR NEGLIGENCE, ON THE BASIS OF STRICT LIABILITY, OR OTHERWISE.
Return Procedures
All products must be flushed of any chemical (ref. OSHA Section 0910.1200 (d)(e)(f)(g)(h)) and hazardous chemicals must be
labeled before being shipped* to Hypro for service or warranty consideration. Hypro reserves the right to request a Material
Safety Data sheet from the Purchaser for any pump or product Hypro deems necessary. Hypro reserves the right to “disposition as
scrap” pumps or products returned which contain unknown substances, or to charge for any and all costs incurred for chemical testing
and proper disposal of components containing unknown substances. Hypro requests this in order to protect the environment and
personnel from the hazards of handling unknown substances.
For technical or application assistance, call the Hypro Technical/Application number: 800-445-8360 , or send an email to:
technical@hypropumps.com . To obtain service or warranty assistance, call the Hypro Service and Warranty number :
800-468-3428 ; or send a fax to the Hypro Service and Warranty FAX : 651-766-6618 .
Be prepared to give Hypro full details of the problem, including the following information:
1. Model number and the date and from whom you purchased your product.
2. A brief description of the product problem.
Hypro may request additional information, and may require a sketch to illustrate the problem. Contact the factory to receive a return
material authorization before sending the product. All products returned for warranty work should be sent shipping charges prepaid to:
HYPRO / PENTAIR
Attention: Service Department
375 Fifth Avenue NW
New Brighton, Minnesota 55112
* Carriers, including U.S.P.S., airlines, UPS, ground freight, etc., require specific identification of any hazardous materials being shipped.
Failure to do so may result in a substantial fine and/or prison term. Check with your shipping company for specific instructions.
Limited Warranty on Hypro Products
Visit www.hypropumps.com/register today to register
your product and stay up-to-date on new products
and promotional offers.
The following information is required:
Model # _______________ Serial # _______________