background image

Hypro/SHURflo (hereafter, “Hypro”) agricultural products are warranted to be free of defects in material and workmanship under

normal use for the time periods listed below, with proof of purchase.

- Pumps: one (1) year from the date of manufacture, or one (1) year of use.  This limited warranty will not

exceed two (2) years, in any event. 

- Accessories: ninety (90) days of use.

This limited warranty will not apply to products that were improperly installed, misapplied, damaged, altered, or incompatible with

fluids or components not manufactured by Hypro. All warranty considerations are governed by Hypro’s written return policy. 

Hypro’s obligation under this limited warranty policy is limited to the repair or replacement of the product. All returns will be tested

per Hypro’s factory criteria. Products found not defective (under the terms of this limited warranty) are subject to charges paid by the

returnee for the testing and packaging of “tested good” non-warranty returns. 

No credit or labor allowances will be given for products returned as defective. Warranty replacement will be shipped on a freight allowed

basis. Hypro reserves the right to choose the method of transportation. 

This limited warranty is in lieu of all other warranties, expressed or implied, and no other person is authorized to give any other

warranty or assume obligation or liability on Hypro’s behalf. Hypro shall not be liable for any labor, damage or other expense, nor  shall

Hypro be liable for any indirect, incidental or consequential damages of any kind incurred by the reason of the use or sale of

any defective product. This limited warranty covers agricultural products distributed within the United States of America. Other world market

areas should consult with the actual distributor for any deviation from this document.

Return Procedures

All products must be flushed of any chemical (ref. OSHA section 1910.1200 (d) (e) (f) (g) (h)) and hazardous chemicals must be

labeled/tagged before being shipped* to Hypro for service or warranty consideration. Hypro reserves the right to request a Material Safety

Data Sheet from the returnee for any pump/product it deems necessary. Hypro reserves the right to “disposition as scrap” products

returned which contain unknown fluids. Hypro reserves the right to charge the returnee for any and all costs incurred for chemical testing,

and proper disposal of components containing unknown fluids. Hypro requests this in order to protect the environment and personnel from

the hazards of handling unknown fluids.

Be prepared to give Hypro full details of the problem, including the model number, date of purchase, and from whom you purchased your

product. Hypro may request additional information, and may require a sketch to illustrate the problem. 

Contact Hypro Service Department at 800-468-3428 to receive a Return Merchandise Authorization number (RMA#).

Returns are to be shipped with the RMA number clearly marked on the outside of the package. Hypro shall not be liable for freight damage

incurred during shipping. Please package all returns carefully. All products returned for warranty work should be sent 

shipping charges

prepaid

to:

HYPRO / PENTAIR

Attention: Service Department

375 Fifth Avenue NW

New Brighton, MN  55112

For technical or application assistance, call the 

Hypro Technical/Application number: 800-445-8360

, or send an email to:

[email protected]

. To obtain service or warranty assistance, call the 

Hypro Service and Warranty number

800-468-3428

;

or send a fax to the 

Hypro Service and Warranty FAX

651-766-6618

.

*Carriers, including U.S.P.S., airlines, UPS, ground freight, etc., require specific identification of any hazardous material being shipped. Failure to do so may

result in a substantial fine and/or prison term. Check with your shipping company for specific instructions.

Hypro (5/13)

Printed in USA

Limited Warranty on Hypro/SHURflo Agricultural Pumps & Accessories

375 Fifth Avenue NW 

 New Brighton, MN 55112  USA

Phone: (651) 766-6300 

 800-424-9776 

 Fax: 800-323-6496

w w w. h y p r o p u m p s . c o m

Visit www.hypropumps.com/register today to register

your product and stay up-to-date on new products 

and promotional offers.
The following information is required:  

Model # _______________  Serial # _______________

Содержание HYPRO 1802C





















Отзывы: