![background image](http://html.mh-extra.com/html/pentair/genesis/genesis_instruction-manual_1524266004.webp)
© 2013 Pentair Equipment Protection
89104462
- 4 -
INSTALLATION INSTRUCTIONS
1. Inspect air conditioner. Verify functionality before mounting the air conditioner, seeHANDLING
AND TESTING THE AIR CONDITIONER on page 3.
2. Using the cutout dimensions shown in this manual or the cutout template printed on the units
shipping carton, prepare the air “IN” and air “OUT” openings, and mounting bolt hole pattern for
the enclosure.
3. Using the gasket kit provided, install gaskets to air conditioner. See gasket kit illustration in this
manual for proper location.
4. Mount air conditioner on enclosure using mounting bolts and screws provided. “EZ” mount tabs
can be used to hold unit on enclosure while mounting in place. Allow unit to remain upright for a
minimum of five (5) minutes before starting. Caution: Air conditioner must be in upright position
during operation.
5. Refer to top of nameplate for electrical requirements. Connect the power cord to a properly
grounded power supply. Use of an extension cord is not recommended. Electrical circuit should be
fused with slow blow or HACR circuit breaker.
Содержание Genesis
Страница 7: ... 2013 Pentair Equipment Protection 89104462 7 M13 SCHEMATIC AND WIRE DIAGRAM 115 230 VOLT 1000 BTU ...
Страница 31: ... 2013 Pentair Equipment Protection 89104462 31 NOTES ...
Страница 36: ... 2013 Pentair Equipment Protection 89104462 36 NOTES ...
Страница 37: ... 2013 Pentair Equipment Protection 89104462 37 NOTES ...