Pentair FLECK 3150 NXT, Руководство по установке

Страница: 115 / 182

Installer manual Fleck 3150 NXT/NXT2 - Programming
Ref. MKT-IM-010 / C - 18.10.2019 115 / 182
Info
Lock Settings prevents unexpected access to master programming.
Info
Once lock settings option is activated, the controller returns to normal service display.
The next time accessing the menu, the controller will call for either a password, or will
grant access to menu only if programmed condition are fulfilled.
Info
Contact your supplier for more information.
Options:
• off;
• delayed;
• enter Code;
• time Based.
a) Select save as non-factory option with and ;
b) Default setting: disabled;
c) Press to validate the selection.
6.2.5.32 Parameters saving
Info
When the last parameter is set and the button pressed (after lock settings), the
controller updates the database based on the new programming.
Info
The main screen appears and valve status is initializing. Wait until updating is finished,
this may take a few seconds.
6.2.6 Diagnostic
Info
Depending on current settings, some displays cannot be viewed.
Info
If none of the buttons are pushed for 5 minutes in the Programming mode, or if there is
a power failure, the controller returns to Service mode without saving.