Pentair FLECK 2850 SXT Скачать руководство пользователя страница 68

Страница: 68 / 104

Installer manual Fleck 2850 SXT - Operation

68 / 104

Ref. MKT-IM-030 / C - 12.05.2020

8.2

Recommendations

• Use only regeneration salts designed for water softening in accordance with EN973;

• for optimal system operation, the use of clean salt, free from impurities, is recommended (for

example salt pellets);

• do not use ice melt, block, or rock salts;

• the sanitizing process (both with liquid and electrochlorination) may introduce chlorine

compounds which may reduce the lifetime of the ion exchange resins. Refer to the technical
guides for resins in common use, providing necessary checks on the system.

8.3

Manual regeneration

Mandatory

The controller must be in service in order to enable this procedure !

8.3.1

Manual delayed regeneration

1. Press

once for delayed regeneration.

The regeneration starts at the programmed regeneration time. See chapter
Regeneration time (RT) [

→

Page 58].

The service icon flashes.

Info

To cancel: press

again.

The service icon stops flashing.

8.3.2

Immediate regeneration

1. Press and hold

for 5 seconds to initiate immediate manual regeneration regardless from

the programmed regeneration control type.

8.3.3

To advance regeneration cycles

1. Press

to pass to the next regeneration cycle.

Содержание FLECK 2850 SXT









































































































Результаты поиска

Содержание FLECK 2850 SXT

Отзывы:

Pentair FLECK 2850 SXT, Руководство по установке, Страница: 68 / 104

Результаты поиска

Содержание FLECK 2850 SXT

Отзывы: