background image

iii

IntelliChlor Power Center Installation Guide

Installation Steps Summary

The recommended Power Center installation steps are:

Review Important Safety Precautions (page ii and 2)

Review this important information.

Review Power Center Overview (page 1)

Review the Power Center overview information.

Installing the IntelliChlor Power Center (page 2 )

Installation information.

Operating Instructions (page 2)

Operating information.

Technical Support

Contact Technical Support at:

Sanford, North Carolina 

(8 A.M. to 5 P.M.)

Phone: (800) 831-7133

Fax: (919) 566-8920

Moorpark, California 

(8 A.M. to 5 P.M.)

Phone: (800) 831-7133

Fax: (805) 530-0194

Web sites

visit www.pentairpool.com and www.staritepool.com

1

3

2

4

Declaration of Conformity

We declare, under our sole responsibility, that the product identified in this declaration, and to which
this declaration relates, are in conformity with the protection requirements of Council Directive 89/
336/EEC and standards IP33

Standard EN60335-1:2001, EN60529

Standard EN6100-3-2:2000, EN6100-3-3:1995 +A1:2001

Standard EN 55014-2: 1997 +A1:2001, EN 55014-1 2000 +A1, +A2 2002

Manufacturer:

Pentair Water Pool and Spa, Inc.
1620 Hawkins Ave, Sanford, NC 27330
10951 West Los Angeles Ave, Moorpark, CA 93021

Содержание C20














Отзывы: