manualshive.com logo in svg

Pentair 2307193, Руководство по эксплуатации, Страница: 13 / 105

Поделиться
Скачать
Pentair 2307193 Скачать руководство пользователя страница 13

13

System Description

5. 

SYSTEM DESCRIPTION

5.1. 

Intended application area

The control head IntelliTop 2.0 has been designed for use as actuation of pneumatically operated process valves 
and / or for recording the switching states of these. 

5.2. 

General description

The control head IntelliTop 2.0 is used for actuating pneumatically operated process valves. 

For process valve actuation, the control head can be equipped with up to three solenoid valves. 

For the recording and feedback of the process valve switching positions to a higher-level control, the control head 
has been equipped with a contact-free position measuring system which operates with 3 discrete, adjustable 
feedback signals (Teach-In function).

The control head and the process valve are interconnected by an adapter. This produces an integrated, compact 
and decentralized system of feedback, actuation and valve function. The following advantages over centralized 
solutions working with valve clusters are achieved:

•  low installation expenditure

•  easy start-up

•  shorter switching times and less air consumption due to shorter distances between the pilot valve and the 

process valve.

Various pneumatic and electrical connection variants are available.

english

Содержание 2307193










































































































Отзывы:

Нет отзывов