2009 AT8 Manual
22
5.2 AT-8 Set Up
before you begin programming your AT-8, you will want to set up the basic system in the set up menu. The set up
menu will allow you to program the date and time in to the AT-8, program and or enter your password to access the
controller, as well as view the serial number and software version specific to your
controller.
When setting the date, a cursor will appear under the value (moth, day or year) you are currently setting. To move the
cursor between values, use the select key. Once you have placed the cursor under the value you wish to change, you
are ready to set the date.
5.2.1
Set date
1 pH
ORP*
TMP F
A 7.0 750
78
X
10-May-06
14:48
PROGRAM SUBMENU
10-May-06
14:48
DATA SUBMENU
10-May-06
14:48
SETUP
Starting from the reading screen. Press the mENU button to
scroll through the available sub-menus.
Press the mENU button Again
Press SElECT to enter the AT-8 Setup submenu
.
Press the mENU button Again
SET DATE
M/D/Y 05/10/06
• To set the month, use the up and down arrows scroll through the numbers until the correct month
is displayed. Press SElECT.
• To set the day, use the up an down arrows scroll through the numbers until the correct day is
displayed. Press SElECT.
• To set the year, use the up and down arrows scroll through the numbers until the correct year is
shown. Press the SELECT button to save your changes and advance to the next setup sub-menu:
Set Time
.
• Using the up and down arrows scroll through the numbers until the correct hour (24hr) is
displayed. Press SElECT.
• Using the up and down arrows scroll through the numbers until the correct minutes is displayed.
Press SElECT.
5.2.2
Set Time
SET TIME
HH:MM
10:34
When setting the time, a cursor will appear under the value (hour or minute) you are currently setting. To move the
cursor between values, use the select key. Once you have placed the cursor under the value you wish to change, you
are ready to set the time.
