PENTAGRAM Cerberus [P 6361]
Operating the device
Front panel
LED
Action
Description
POWER
Not lit
No Power
Lit up
Power on
SYS
Not lit
No Power or system initializing
Flashing
System ready
WPS
Flashing
Device is negotiating with client in WPS mode.
WLAN
Not lit
The Wireless function is disabled
Lit up
The Wireless function is enabled
Flashing
Data transfer
WAN & 1-4 Not lit
No device connected to the corresponding port
Lit up
Network device connected to the corresponding port
Flashing
Network actity of the corresponding port
Rear Panel
Label
Used for...
POWER
Connecting with supplied power adapter
WAN (RJ-45)
Connecting with DSL/cable modem through Ethernet cable
LAN 1-4 (RJ-45)
Connecting with computers/devices through Ethernet cable
RESET
Resetting the device.
WPS
Connecting with wireless station via WPS. Press this button for about
1 second while you are connecting a PC of wireless adapter with WPS
function (you must enable WPS’ PBC function).
6
Содержание P 6361
Страница 15: ...PENTAGRAM Cerberus P 6361 PPTP L2TP 15 ...