Pentagram Cerberus P6391, Инструкция по установке и эксплуатации

Страница: 56 / 56

Cerberus P 6391
56
Problems with the Web Interface
I cannot access the web Interface:
1.
Make sure you are using the correct IP address of the router. Check the IP address of the
router;
2.
Your computer’s and the router’s IP addresses must be on the same subnet for LAN
access;
3.
If you changed the router’s LAN IP address, then enter the new one as the URL;
4.
Remove any filters in LAN or WAN that block web service.
Problems with the Login Username and Password
I forgot my login username and/or password:
1.
The default username is “
admin
”. The default password is “
pentagram
”. The Password
and Username fields are case-sensitive. Make sure that you enter the correct password
and username using the proper casing;
2.
If you ever forget the password to log in, you may need to restore the factory default
settings. Use the
RESET
button: First, turn off the router's power. Second, press and
hold the default reset button then turn on the router's power, until the SYS LED lights up
(about 3 seconds). Last, release the reset button and wait for the router to reboot.
Problems with LAN Interface
I cannot access the router from the LAN or ping any computer on the LAN:
1.
Check the Ethernet LEDs on the front panel. A LAN LED should be on for a port that has
a PC connected. If it is off, check the cables between your router and the PC. Make sure
you have uninstalled any software firewall for troubleshooting;
2.
Make sure that the IP address and the subnet mask is consistent between the router and
the workstation.
Problems with the Internet Access
I cannot access the Internet:
1.
Make sure the router is turned on and connected to the network;
2.
If the WAN LED is off, refer to Section
WAN LED
of this troubleshooting;
3.
Verify your WAN settings;
4.
Make sure you entered the correct user name and password;
5.
For wireless stations, check that both the router and wireless station(s) are using the
same SSID, channel and encryption keys (if encryption is activated).
Internet connection disconnects:
1.
If you use PPPoE, check the idle time-out setting;
2.
Contact your ISP.