Pentagram Cerberus P 6331-4A, Инструкция по установке и эксплуатации

Страница: 25 / 62

Cerberus P 6331-4A
25
LAN
There are the IP settings of the LAN Interface for the device. These settings may be referred
to as Private settings. You may change the LAN IP address if needed. The LAN IP address is
provided to your internal network and cannot be seen on the Internet.
•
Router Local IP
IP Address – Enter the IP address of your ADSL router in dotted decimal notation, for
example, 192.168.1.100 (default setting).
IP Subnet Mask – Your ADSL router will automatically calculate the subnet mask based
on the IP address that you assign. Unless you are implementing sub netting, use the
subnet mask computed by the ADSL router.
Dynamic Route – Select the Dynamic Route from RIP1, RIP2-B, and RIP2-M. Please
refer to Internet → Dynamic Route. The only difference is the interface.
Multicast – IGMP (Internet Group Multicast Protocol) is a session-layer protocol used to
establish membership in a multicast group. Please refer to Internet → Multicast. The only
difference is the interface.
IGMP Snoop – Choose whether to Disable or Enable IGMP Snoop function.