5
TWO: MOUNTING
MOUNTING 2
1. Mount the guide rails (C) to the sides
of the opening face, using a level to
ensure they are straight.
1
5
2
6
3
7
4
8
Use the #10 - 2” screws (F1), and leave
them slightly loose for adjustments in
step 4.
Put the guide rail access panels back
on by applying pressure in the spot
indicated below.
Follow the steps shown below to
remove the guide rail access panel and
insert the screws through the guide
rails at 16” intervals vertically.
Next, put the guide inserts into the
guide rails. Ensure the pointed end of
the guide inserts are at the top of the
guide rails and the point goes towards
the back of the box housing (A).
