mini ScanEYE II
3-
*. Pre-emptive Linking
In any continuous text (2 characters), the first character is the second character’s
uplink, while the second character is the first character’s downlink. For example
科技
,
where
科
is
技
’s uplink, while the character
技
is
科
’s downlink.
1. When using the mini ScanEYE II, the recognition results will be directly transferred
to the desired application.
2. As shown in the illustration, the character
恬
has been recognized incorrectly as
恰
as
well as
科
which also has been incorrectly recognized as
料
.
2. Leave your cursor on the character for 1-2 seconds and a window
showing a list of suggested corrections will be presented.
3. If the correct character appears among the list of characters pre-
sented, you can click on the character to have your current incorrect
character replaced.
5. Lastly, notice that the wrong character has been replaced.
3. Leave your cursor on the character
恰
for
1-2 seconds and a window will pop up
listing possible characters. In the pop up
window, click on the magnet which is fac-
ing left (uplink)
and you will notice
another pop up window which shows you a
list of combination which the system thinks
are possible replacements for the resulting
recognition.
4. Leave your cursor on the character
料
for
1-2 seconds, which will once again invoke
the pop up window with the list of possible
replacements. This time round, click on the
magnet which is facing right (downlink)
and the very same panel will pop up again
with a list of combination of characters for
you to choose from.
5. After the correct combination, the correct resulting text will now
appear in the result box.