Table 15: UL Conformity declaration information
Information
Description
Cover screw torque requirements
instruction
To maintain type IP65 rating, tighten enclosure cover screws to 0.9–1.1 N·m (8–
10 in·lb)
Table 16: TE-631AP-1 temperature sensor
Information
Description
Operating conditions
Enclosure: -46°C to 50°C (-50°F to 122°F)
Sensor probe: -46°C to 104°C (-50°F to 220°F)
Reference resistance
1K ohms at 21°C (70°F)
Accuracy
±0.19C° at 21°C (±0.34°F at 70°F)
Sensor construction
Probe: 127 mm (5 in.)
Well: 152 mm (6 in.)
Sensor cable sheath
Plastic enclosure
The performance specifications are nominal and conform to acceptable industry standards. For application at conditions
beyond these specifications, Johnson Controls shall not be liable for damages resulting from misapplication or misuse of
its products.
North American emissions compliance
United States
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used
in accordance with the instructions, may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference
to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to
try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Canada
This Class (B) digital apparatus meets all the requirements of the Canadian Interference-Causing Equipment Regulations.
Cet appareil numérique de la Classe (B) respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada.
Single point of contact
APAC
Europe
NA/SA
JOHNSON CONTROLS
C/O CONTROLS PRODUCT MANAGEMENT
NO. 32 CHANGJIJANG RD NEW DISTRICT
WUXI JIANGSU PROVINCE 214028
CHINA
JOHNSON CONTROLS
WESTENDHOF 3
45143 ESSEN
GERMANY
JOHNSON CONTROLS
507 E MICHIGAN ST
MILWAUKEE WI 53202
USA
For more contact information, refer to
www.johnsoncontrols.com/locations
.
A525 Fermentation Tank Controller Installation Guide
11
