Thermal Control
A thermal PTC sensor is provided and will need to be plugged into the fan tray before use.
The unit is factory set to operate at 30ºand will reset as the temperature falls back by 4º.
Custom settings can be made using the front panel buttons.
Using the alloy adhesive clip the sensor should be mounted onto an area where the sensor can
pick up the ambient temperature of the equipment being cooled, and NOT directly to the main
heat source.
Power Supply
A UNIVERSAL-PSU 12V DC 1A supply that can
power up to 2 fan units is supplied.
The Link socket shown below can be used to pass
this power to 1 other unit via a CRC-Link cable
9-10 Parsons Road, Parsons Industrial Estate, Washington Tyne & Wear, NE37 1HB, UK
0191 416 1717 or www.penn-elcom.com
2016 –FT01Q-DTC 1U FAN TRAY is the exclusive design copyright of Penn-Elcom UK NE37 1HB - E&OE
CRC-LINK
