manualshive.com logo in svg

Penlon A200SP, Руководство пользователя, Страница: 7 / 48

Поделиться
Скачать
Penlon A200SP Скачать руководство пользователя страница 7

A200SP Absorber 

1 

User Manual

User Responsibility

This device has been built to conform with the specification and 

operating procedures stated in this manual and/or accompanying 

labels and notices when checked, assembled, operated, 

maintained and serviced in accordance with these instructions.

To ensure the safety of this device it must be checked and 

serviced to at least the minimum standards laid out in this 

manual. A defective, or suspected defective, product must not 

under any circumstances be used.

The user must accept responsibility for any malfunction which 

results from non-compliance with the servicing requirements 

detailed in this manual.

Additionally, the user must accept responsibility for any 

malfunction which may result from misuse of any kind, or 

non-compliance with other requirements detailed in this 

manual.

Worn, broken, distorted, contaminated or missing components 

must be replaced immediately. Should such a repair become 

necessary it is recommended that a request for service advice be 

made to Penlon Limited or the nearest Penlon Service Centre.

This device and any of its constituent parts must be repaired 

only in accordance with written instructions issued by Penlon 

Limited and must not be altered or modified in any way 

without the written approval of Penlon Limited. 

The user of this equipment shall have the sole responsibility 

for any malfunction which results from improper use, 

maintenance, repair, damage or alteration by anyone other 

than Penlon Limited or its appointed agents.

USA and Canadian Federal Law restricts the sale and use of 

this device to, or on the order or, a licensed practitioner.

Statements in this manual preceded by the following words 

are of special significance:-

WARNING
indicates a possibility of injury to yourself or others.

CAUTION

indicates a possibility of damage to the apparatus or other 

property

NOTE
indicates points of particular interest for more efficient and 

convenient operation.

The reader must take particular notice of the warnings, 

cautions and notes provided throughout this manual.

Содержание A200SP

















































Отзывы:

Нет отзывов