P
P
E
E
S
S
1
1
9
9
0
0
0
0
G
G
i
i
G
G
S
S
M
M
R
R
e
e
p
p
e
e
a
a
t
t
e
e
r
r
— Chapter 4. Mounting the PES1900GI NR
PES1900NR Operations Manual
46
Pole Mounting
Peninsula Engineering Solutions offers optional pole mounting equipment for the PES1900Gi NR,
available when ordering the PES1900Gi NR—see Ordering Information.
Pole installation requires the following materials:
⇒
Pole mounting kit (available from Peninsula Engineering Solutions)
⇒
Banding kit (purchased separately—available from McMaster-Carr), for mounting the
repeater on concrete or metal poles.
⇒
Class A – Pole Line Hardware
, for bolting the Pole Mounting Bracket to a wood pole.
The Pole Mounting Channel is designed so that the repeater is squarely mounted on the pole, and
does not wobble.
When mounting the repeater onto a concrete or metal pole, use the Banding Kit. You usually would
not drill a mounting hole through the center of a concrete pole. Similarly, because metal poles might
have cables running up the center, drilling is not recommended. In both cases, banding is preferred
over drilling.
However, wood telephone-type poles are easier to drill, so you can use lag screws or through-pole
bolts to fasten the pole-mounting channel.
The following tables describe the Pole Mounting and Banding Kits. Because the Banding Kit includes
100 feet of band, you do not need to purchase a separate kit with every repeater.
Table 20 Optional Pole Mounting Kit
Pole Mounting Kit (091-0215-01)
Quantity
Item
1 Pole-Mounting
Channel
4 Bolts
4
Lock (Split) Washers
4 Flat
Washers
4
Tapered Plug, 0.312-inch diameter hole
4
Class A—Pole Line Hardware is a telephone term. It specifies bolts and screws that have a heavy
electro-galvanized plating, so they do not rust. This type of rugged hardware typically is available
from telephone equipment distributors, such as Graybar Electric, ALLTEL Supply, Sprint-North
Supply, PowerTel Supply, and so on. The same type of hardware is also available from antenna
suppliers, and from tower erection companies.