Penguin Edge™ ATCA-75XX-KIT-M.2 Quick Start Guide
Penguin Solutions™, 2900 S. Diablo Way, Suite 190, Tempe, Arizona 85282
9. Align the mating posts of the M.2 connector to the mating posts
of the ATCA blade. Make sure the M.2 connector is parallel to
the mating connector, see illustration
D
.
The M.2 connector should align on both posts of the
blade’s mating connector. Failure to do so, may result in
connector pin damage or in a short.
10.Apply a small amount of equal pressure to the top corners of the
M.2 assembly (directly above the two mating posts) and gently
press down to make sure a proper connection is achieved.
Note:
The connection is correct when the M.2 assembly bracket
mounting holes align with the mating standoff mounting holes on
the ATCA blade, see illustration
E
.
11. Insert a M2.5 x 4mm pan head screw in each standoff. Hold the
M.2 assembly in place while tightening the screws.
12.Torque each M2.5 x 4mm screw to 0.3 N-m.
13.Tighten each bracket screw to secure it to the M.2 assembly.
14.Torque each M2.5 x 6mm bracket screw to 0.3 N-m.
You have completed the replacement of an ATCA-75XX-KIT-M.2.
Align M.2 Connector to PCB Mating Connector Posts
D
Align Brackets and Standoffs
E
Insert Standoff Screws (5)
F
Tighten and Torque Screws
Tighten and Torque Screws
G
Penguin Solutions is a trade name used by SMART Embedded Computing, Inc., a
wholly owned subsidiary of SMART Global Holdings, Inc. Penguin Edge is a
trademark owned by Penguin Computing, Inc., a wholly owned subsidiary of
SMART Global Holdings, Inc. All other logos, trade names, and trademarks are
the property of their respective owners. These materials are provided as a service
to our customers and may be used for informational purposes only. For full legal
terms and conditions, please visit
www.penguinsolutions.com/edge/legal/
.
©2022 SMART Embedded Computing, Inc.
Technical Assistance
For more information on this product, see the
Penguin Edge™
ATCA-7540 Series Installation and Use
manual and other related
documentation which can be found using the Documentation Search
at
https://www.penguinsolutions.com/edge/support/
.
Get More Information
For technical assistance or to report product damage or shortages,
contact your local Penguin Solutions™ sales representative or visit
https://www.penguinsolutions.com/edge/support/
.
