2
Safety
Read this page carefully before you install and use the product.
This product has been designed and tested according to safety Class 1
requirements of EN61010-1 and CSA 22.2 No.1010.1, and has been supplied in
a safe condition. The user of this product must have the required knowledge of it.
This knowledge can be gained by thoroughly studying this manual.
This product is designed to be used by trained personnel only. Removing the
cover for repair, maintenance, and adjustment of the product must be done by
qualified personnel who are aware of the hazards involved.
Safety Precautions
To ensure the correct and safe operation of this product, it is essential that you
follow generally accepted safety procedures in addition to the safety precautions
specified in this manual.
Do not exceed maximum power, voltage and current ratings for inputs and outputs.
SAFETY
Fig. 2-1
Do not overlook the safety instructions!
If in doubt about safety
Whenever you suspect that it is unsafe to use the product, you must make
it inoperative by doing the following:
–
Disconnecting the line cord
–
Clearly marking the product to prevent its further operation
–
Informing your Pendulum representative.
For example, the product is likely to be unsafe if it is visibly
damaged
.
