Page | 7
About the Orientation Sensor
The Pendo Pad contains a sensor that will automatically change the orientation of most screens as you rotate the pad. The
sensor works best when the pad is rotated perpendicular to the ground (i.e., when the pad is held upright and not fat on its
back).
The orientation sensor can be turned on and off in the
Display
settings menu.
Charging the Pendo Pad
The Pendo Pad comes with a built-in rechargeable lithium-polymer battery.
Before using the pad, the battery should be charged fully. The Status Indicator will light blue when the battery is charged
fully.
To charge the battery:
Plug one end of the included power adapter into an AC 100-240V outlet.
Plug the other end of the included power adapter into the Power jack on the pad.
Disconnect the power adapter when the pad is fully charged.
The battery used in this device may present a fire or chemical burn if mistreated. Do not disassemble, incinerate, or
heat the device. Do not leave the device in a place subject to direct sunlight, or in a car with its windows closed. Do
not connect the device to a power source other than that which is indicated here or on the label as this may result
in the risk of fire or electric shock.
Inserting a Memory Card
The pad accepts microSDHC memory cards. Insert a memory card into the microSDHC card slot to:
Increase the memory capacity of your pad
Play media files stored on the memory card (e.g., music, video, or photo files).
To insert a memory card:
Align the memory card with the card slot. The metal contacts of the memory card should face down away from the LCD
screen.
Slide the card into the spring-loaded slot. Push the card in until it clicks into place.