Pelstar Health O Meter 822KL, Инструкция пользователя

Страница: 6 / 15

P/N UM822KL_844KL_REV20190226_Web
6
TROUBLESHOOTING / MAINTENANCE & CLEANING
Refer to the following instructions to check and correct any failure before contacting
Customer Service.
If the display shows “Lo bAtt” message,
replace batteries per the instructions on
page 4.
If the display shows “Err E” the load on the
scale exceeds the capacity.
822KL Capacity: 400 lb / 180 kg
844KL Capacity: 440 lb / 200 kg / 31 st
For further assistance please contact technical support toll free at 1 (800) 638-3722.
Maintenance
Caution: Before first use, or after long periods of non-use, check the scale for
proper operation and function. If the scale does not operate correctly, refer to
qualified service personnel.
1. Check overall appearance of the entire scale for any obvious damage, wear and
tear.
2. Do not store near chemicals, heaters or radiators.
3. Do not drop, kick, or jump on the scale.
4. This scale is a sensitive weighing device. Do not store anything on top of the scale
platform.
5. If your scale fails to work properly, do not attempt to dismantle it. This will void your
warranty.
Cleaning and Disinfecting
Proper care and cleaning is essential to ensure a long life of accurate and effective
weighing.
1. Health o meter
®
Professional recommends using a mild soap and water solution on
a soft cloth or disposable wipe:
2. After cleaning/disinfecting, wipe with a cloth dampened with water and then with a
clean dry cloth. To avoid residue build-up or damp surfaces, ensure all scale parts
are completely dry after cleaning.
3. Never use rough or abrasive materials to clean the scale, as these will damage the
scale’s finish.
4. Do not submerge the scale in water or any other liquid.
5. Do not pour or spray fluids directly on the scale.
Column B
(top)
Column B
(top)