Pelpro PP60 Скачать руководство пользователя страница 1

Страница: 1 / 40

7083-171B • July 23, 2013 (877) 427- 3316

This heater meets the U.S. Environmental Protection Agency’s emission limits for wood heaters sold after July 1, 1990.

PP60 Pellet Stove

Model(s):

PP60

HOT SURFACES!

Glass and other surfaces are hot

during operation AND cool down.

Hot glass will cause burns.

•

Do not touch glass until it is cooled

•

NEVER allow children to touch glass

•

Keep children away

•

CAREFULLY SUPERVISE children in same room as

fireplace.

•

Alert children and adults to hazards of high temperatures

• High temperatures may ignite clothing or other

flammable materials.

•

Keep clothing, furniture, draperies and other flammable

materials away.

WARNING

If the information in these instruc-

tions is not followed exactly, a fire

may result causing property dam-

age, personal injury, or death.

• Do not store or use gasoline or other flam

mable vapors and liquids in the vicinity of

this or any other appliance.

• Do not overfire - If heater or chimney con

nector glows, you are overfiring. Overfiring

will void your warranty.

• Comply with all minimum clearances to

combustibles as specified. Failure to com

ply may cause house fire.

Questions, problems, missing parts?

Before returning to your retailer, call our

customer service department at 877-427-3316.

WARNING

SAFETY NOTICE: PLEASE READ THIS ENTIRE MANUAL

BEFORE INSTALLATION AND USE OF THIS PELLET FUEL-

BURNING ROOM HEATER. FAILURE TO FOLLOW THESE

INSTRUCTIONS COULD RESULT IN PROPERTY DAMAGE,

BODILY INJURY OR EVEN DEATH. CONTACT LOCAL BUILD

ING OFFICIALS ABOUT RESTRICTIONS AND INSTALLATION

INSPECTION REQUIREMENTS IN YOUR AREA.

Owner’s Manual

Installation & Operation

INSTALLER: Leave this manual with party responsible for use and operation.

OWNER: Retain this manual for future reference.

NOTICE: DO NOT DISCARD THIS MANUAL

NOTE

To obtain a French translation of this manual, please contact

your dealer or visit www.pelprostoves.com

Pour obtenir une traduction française de ce manuel, s’il vous

plaît contacter votre revendeur ou visitez www.pelprostoves.com

Содержание PP60









































Результаты поиска

Содержание PP60

Отзывы:

Похожие инструкции для PP60

Бренды по названию

Популярные бренды

Pelpro PP60, Руководство пользователя

Результаты поиска

Содержание PP60

Отзывы:

Похожие инструкции для PP60

Бренды по названию

Популярные бренды