background image

PELOTON HEART RATE MONITOR

 

Peloton Interactive, Inc. 125 W 25th Street, 11FL, New York, NY 10001 www.onepeloton.com

USING THE PELOTON HEART RATE MONITOR

•  Snap the sensor pod onto the chest strap.

•  Adjust the strap to fit your lower chest. It should be snug but

comfortable.

•  When the heart rate monitor detects a heartbeat, the LEDs will

flash red and blue. If your monitor does not detect your heartbeat,

aid the connection by moistening the electrodes with a small 

amount of water, saliva, or electrode heart rate gel.

• Join a class. The heart rate monitor will connect to your Peloton

product automatically via ANT+.

READING THE LED INDICATORS

 Flashing  Red:

  The heart rate monitor detects a heartbeat. 

The LED will stop flashing after 30 seconds.

Flashing Blue:

 The heart rate monitor detects a heartbeat and is 

in Bluetooth pairing mode. The LED will continue flashing until the 

monitor connects to a Bluetooth device, even if you connect to a 

Peloton product via ANT+.

Flashing Yellow:

 The heart rate monitor’s battery is low. Replace 

immediately with a new CR2032 3-volt battery.

REPL ACING THE BATTERY

•  The right LED will flash yellow when the battery needs to be replaced.

•  The battery door is located on the underside of the sensor pod.

Unscrew it by inserting a coin into the slot and rotating it counterclockwise.

•  When the battery door is loose, remove it. The battery sits inside the battery door.

•  Wait for 20-30 seconds.Then insert a new CR2032 3-volt battery, with the flat side facing down.

•  Place the battery door over the markers. Insert a coin into the door slot and rotate

clockwise until the door is flush with the underside of the sensor pod.

•  Test the heart rate monitor to make sure the sensor activates.

30 - 240 beats per minute (bpm)

User replaceable CR2032 3 volts

600+ hours

     2.402 – 2.480 GHz (BLE) / 2.457 GHz(ANT+) 

IPX7 Water Resistant

0 - 50°C/-32 - 122°F

13 grams

64mm

           ‐1.27 dBm (BLE) / ‐1.44 dBm (ANT+)

Typical 7.5mA

Less than 10uA

2AA3NHRC01 

SPECIFICATIONS

Heart rate measurement range 
Battery type 
Expected battery life 
Radio frequency protocol
Water rating
Operating temperature range
Weight
Size (sensor pod only)
Maximum output power
Peak active current
Stand-by- current
Contains FCC ID

READ IMPORTANT SAFETY INFORMATION ON REVERSE SIDE OF PAGE.

 

Follow all warnings and instructions.

   

WARNING

 Contact your local waste services provider to recycle coin cell batteries.

       Batteries may contain perchlorate material and special handling may be required.

       California customers: see www.dtsc.ca.gov/hazarouswaste/perchlorate

Отзывы: