40
41
|
MAINTENANCE AND CARE
MAINTENANCE AND CARE
CONTINUED
y
Frame:
Check the entire frame for signs of wear and damage, and tighten any loose bolts.
Pedals
: Replace pedals. Tighten new pedals to 34 N·m/25 lb-ft of torque. For further
instructions, see
support.onepeloton.co.uk
.
ANNUALLY
WARNING:
Do not over-tighten the seat slider adjustment knob. Over-tightening could
result in malfunction or breakage.
EVERY 15 TO 20 RIDES
y
Emergency brake
: Press down on the resistance knob while pedaling slowly. The
flywheel should come to a complete stop immediately. If it does not, stop using the bike
immediately and contact Peloton Support.
y
Seat slider latch:
Check the seat slider for movement when in a locked position. If the
seat slider moves or wiggles when locked, you will need to tighten it.
1
Open the latch.
2
Turn the knob on the other side of the seat slider ¼ turn clockwise.
3
Close the latch. Test the saddle to see if it moves or wiggles.
4
If the seat is still loose, continue tightening the knob in ¼ increments.
To tighten the seat slider :
y
Test the saddle between each adjustment.
y
Only adjust the knob when the latch is open.
y
Never turn the knob more than 90° at a time.
