2
does not fit fully in the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician. DO NOT attempt to defeat this
safety feature. To do so could result in an electric shock hazard.
10. This heater draws 3.3 amps during operation. To prevent
overloading a circuit, do not plug the heater into a circuit that
already has other appliances working.
11. CAUTION: It is normal for the plug to feel warm to the
touch; however, a loose fit between the AC outlet and plug may
cause overheating and distortion of the plug. Contact a qualified
electrician to replace loose or worn outlet.
12. To disconnect the heater, first turn controls to off, then
remove plug from outlet. Never pull by the cord.
13. Do not insert or allow foreign objects to enter any ventilation
or exhaust opening as this may cause electric shock, fire, or
damage the heater.
14. CAUTION: Always plug heaters directly into a wall outlet.
Never use with an extension cord or relocatable power tap
(outlet/power strip).
15. A heater has hot and arcing or sparking parts inside. Do
not use it in the areas where gasoline, paint, or
flammable liquids are used or stored.
16. Use this heater only as described in this manual. Any
other use not recommended by the manufacturer may
cause fire, electric shock, or injury to persons.
17. The output of this heater may vary and its temperature may
become intense enough to burn exposed skin. Use of this
heater is not recommended for persons with reduced sensitivity
to heat or an inability to react to avoid burns.
18. Don't leave the heater on unattended.
19. To prevent a possible fire, do not block air intakes or
exhaust in any manner. Do not use on soft surfaces, like a bed,
where openings may become blocked.
