Pelonis NTH15-17BRA, Инструкция по эксплуатации

Страница: 10 / 14

This heater works either vertically or
horizontally, depending on the
working condition and consumers’
preferred way.
SETTING THE MODE
Press the MODE button repeatedly to
select desired operating modes in a
circular sequence
HIGH-LOW-FAN ONLY-ECO-HIGH.
SETTING THE TIMER TO TURN OFF
THE HEATER
When the heater is in operation, press the
timer button to automatically turn off the
heater in a specific number of hours set in
a sequence from 0
─
24 hours. Press the
UP button to increase 1 hour each
time, and DOWN button to decrease
1 hour each time.
SETTING THE TEMPERATURE
When the heater is working, press the UP
button or DOWN button to set the
desired temperature between 40 and 95
°
F .
Once the room temperature reaches the
set temperature, the LED display will flash
for 10 seconds and the heating element
will stop heating and turn to Stand By
status. When the room temperature falls
below the set temperature, the unit will
resume heating.
TURNING ON/OFF THE HEATER:
1. Place the heater on a firm, level
surface free from obstructions, and
at least 3’ (90 cm) away from any wall
and any other objects such as furniture,
curtains, plants or combustible materials.
2. Make sure to plug the power cord of
the heater into a grounded 120 V AC,
60 Hz power outlet.
3. Press the ON/OFF button to turn on
the heater. When the ON/OFF button
is first pressed, the unit will run at high
power setting, and temperature setting
at 95
° F .
Model No NTH15-17BRA