Once a timer is set, its
GREEN
light will remain
ON
. Then, as the heater turns on during
the set
ON TIME
chosen, the green light will turn
RED,
indicating that the heater is
ON
.
The light will revert back to green when the heater turns off after it reaches the set
OFF
TIME
.
TURNING OFF THE TIMERS (TIME SET I & TIME SET II)
You can turn off either or both timers by doing the following:
Turning Off TIME SET I:
To turn off TIME SET I, set the ON TIME and OFF TIME to “00:00”.
Turning Off TIME SET II:
To turn off TIME SET II, set the ON TIME and OFF TIME to “00:00”.
ADDITIONAL FEATURES
This heater has additional features:
•
Safety Cover - Helps keep children or pets from touching the top hot surface of
the heater.
•
Convenient front and rear Carry Handles and Heavy-Duty Caster Wheels -
Allow for easy maneuvering from room to room.
•
Cord Storage Compartment - Neatly stores power cord when the heater is not
used.
TROUBLESHOOTING
If your heater fails to operate, please follow these instructions:
•
Ensure that your circuit breaker or fuse is working properly.
•
Be sure the heater is plugged in and that the electrical outlet is working
properly.
•
Check for any obstruction. If you find any obstruction, turn the heater
“OFF”
.
Unplug the heater and wait a few minutes for it to cool down. Carefully remove
the obstruction. Plug the heater in and turn it on again by referring to the
OPERATING INSTRUCTIONS
.
NOTE: IF YOU EXPERIENCE A PROBLEM WITH YOUR HEATER, PLEASE SEE THE
WARRANTY INFORMATION FOR INSTRUCTIONS. PLEASE DO NOT ATTEMPT
TO OPEN OR REPAIR THE HEATER YOURSELF. DOING SO MAY VOID THE
WARRANTY AND COULD CAUSE DAMAGE OR PERSONAL INJURY. IF THE
PROBLEM STILL PERSISTS, PLEASE CONTACT US BY REFERRING TO THE
SERVICE & SUPPORT INFORMATION.
CLEANING AND STORAGE
It is recommended that the heater be cleaned at least one time during the operating
season in order to provide the optimum level of performance.
ALWAYS TURN THE
POWER SWITCH OFF AND UNPLUG THE HEATER BEFORE CLEANING
. Be sure to save
the box for off-season storage.
•
Turn the heater
“OFF”
, unplug it and wait for the heater to cool down.
•
Use a dry cloth to clean only external surfaces of the heater.
•
Do not use any cleaning agents or detergents.
•
Never immerse the heater in water.
•
Pack the heater in the original carton and store it in a cool and dry place.
SPECIFICATIONS
Model No.: HO-158E
Voltage: 120V, 60Hz
Current: Maximum continuous draw: 12.5 Amps.
Output: 5200 BTUs
Power: LO = 600 Watts, MED = 900 Watts, HI = 1500 Watts
Tolerances on all specifications: Approxi5%, -10%
