PARTS NAME
1. Body
2. Front base
3. Rear base
4. Base clip
5. Power cord
PARTS ASSEMBLY
1. Pull power cord (5) out slightly.
2. Put the rear base (2) on the body (1) by inserting the cylinders under the
body to blind holes on rear base as shown on diagram.
3. Put front base on rear base (3) and fix the body, the rear base and front base
by base clip (4) as shown.
1
3
2
4
5
OPERATING INSTRUCTIONS
a. Control parts description:
1. OFF Switch 2. Speed switch
3. Body oscillating switch
b. Instructions:
1. Plug the power cord into a wall outlet.
2.The air flow can be angled to left or right
by pushing the button of body oscillating
switch (3). If you want to stop oscillating
,
push it again.
3. Speed is controlled by push speed switch (2)
on the top of the body. There are 4 positions:
2
User Servicing Instructions:
a) Grasp plug and remove from the receptacle or other
outlet device.Do not unplug by pulling on cord.
b) Open fuse cover. Slide open fuse access cover on
top of attachment plug towards blades.
c) Remove fuse carefully. Push the fuse from the other
side or turn fuseholder over to remove fuse.
d) Risk of fire. Replace fuse only with 2.5 Amp, 125 Volt fuse.
e) Close fuse cover. Slide closed the fuse access cover on top of attachment plug.
f) Risk of fire. Do not replace attachment plug. Contains a safety device (fuse)
that should not be removed. Discard product if the attachment plug is damaged.
Notice:
1. If fuse is difficult to install, please make sure you are installing properly.
2. When you feel it hard to be operated, please make sure you have got the right
way.
RULES FOR SAFE OPERATION
When using electrical appliances, basic precautions should always be followed to
reduce the risk of fire, electric shock and injury to persons, including the following:
(1) This product employs overload protection (fuse). A blown fuse indicates an
overload or short-circuit situation. If the fuse blows, unplug the product from
the outlet. Replace the fuse as per the user servicing instructions (following
product marking for proper fuse rating) and check the products.
2. Never insert fingers, pencils, or any other object through the grill when fan
is running.
3. Disconnect fan when moving from one location to another.
4. Disconnect fan when removing grilles for cleaning.
5. Be sure fan is on a stable surface when operating to avoid overturning.
6. DO NOT use fan in window, rain may create electrical hazard.
7. Indoor use only.
(2) Do not operate any fan with a damaged cord or plug.
(3) Do not run cord under carpeting. Do not cover cord with throw rugs, runners,
or similar coverings. Do not route cord under furniture or appliances.
Arrange cord away from traffic area and where it will not be tripped over.
3
--OFF ; --Low ; --Medium ; --High
1
2
3
