Base
Front Guard
Blade
Plastic Nut
Rear Guard
Motor Shaft Oscillating
Fan Body
Piano-key
Spinner
unscrew
BASE ASSEMBLY
PARTS NAME
1. Take the Spinner out from the bag, then remove the plastic nut by turning
it counterclockwise.
2. Set the rear grill in the proper position with the handle up.
3. Screw on plastic nut tightly to attach grill.
4. Install the blade onto the shaft until the retaining pin fits into the notch on
the blade.
5. Screw spinner on to motor shaft counterclockwise.
6. Mount the Front Grill and join both Grills together using the Clips.
1. Detach screw from base of the fan.
2. Match locking tab to base and click into position.
3. Tighten the screw in the base to secure the fan to the base.
Speed control
Press each button to control speed:
0--Off 3---High 2---Medium 1--Low
Oscillation control
To make the fan oscillate, push down on the oscillation knob located on the top of
the motor housing. To stop the fan from oscillating, pull up the oscillating knob.
Tilting control
The airflow can be adjusted upward or downward by tilting the fan head to the
vertical angle desired.
OPERATION INSTRUCTION
ASSEMBLY OF BLADE AND GRILLS
2
