14
BE SURE TO INSTALL IN THE RIGHT DIRECTION!
USE
• Hold the pruning shears.
•
For use in progressive mode
, press trigger
05
with your index finger, and with the other hand, move
switch
12
from position
«0»
to position
«1»
(the red face appears).
For use in non-progressive mode
, do
not press the trigger and move switch
12
from position
«0»
to position
«1»
(the red face appears).
• Wait until the battery beeps 3 times.
• The pruning shears are switched on but inoperative.
• Press and release trigger
05
; the pruning shears become operative in the chosen mode.
• To stop the pruning shears, close blade
20
using trigger
05
, keep the trigger pressed, move switch
12
to
the off position
«0»
(the red face disappears).
• If the wood that is cut is too thick, the pruning shears stop during blade closing. The only possibility is to
open the blade.
•
In this mode, the blade follows the finger movement in a proportional manner.
• To save battery power and ensure maximum working capacity for the pruning shears, we advise you to
keep the blades closed and to open them only to the size of the wood to be cut.
PROGRESSIVE MODE (FULL OPENING)
• In this mode, the blade closes when the trigger is pressed.
• When main trigger
05
is pressed, the blade closes.
• When main trigger
05
is released, blade opened in semi-open mode.
• When secondary trigger
06
is pressed, the blade opens fully.
SEMI-OPEN MODE
