pellenc ALPHA 260, Руководство по эксплуатации

Страница: 12 / 27

PELLENC POWER TOOLS BATTERY ALPHA 260 / 520
56_133912-F
4. COMMISSIONING
4.1. BATTERY DISPLAY
The battery has a gauge display showing the remaining capacity it holds. The capacity
is expressed as a percentage.
• If the gauge display shows , the battery is fully charged.
• If after a day's work the display shows , there is no need to recharge the battery before another day of work.
• If the display shows , or very close to it, it must be recharged at once.
• The battery gauge must be used like a fuel gauge on a car.
• While using the tool, the battery display may show to avoid duplicating the tool display.
When the battery is turn on with the on/off button (5), the
battery on LED shows fixed red on the display. If the bat-
tery power LED (7) flashes after 5 seconds, this means
the battery is waiting for a tool to be attached with a quick
connector.
4.2. CHARGING THE BATTERY
When the battery is discharged, the tool stops automat-
ically, the battery gauge display (6) shows 0% and the
buzzer beeps intermittently (see Section 7.1, “Summary
of charge indicator and beep messages” ).
Press the on/off button (5) at once to turn the battery off.
When the battery is turned off, the battery power LED (7)
disappears.
Note
Before using the battery for the first time at the start
of a new season, it must be fully charged (99%
steady).
12