INSTALLATION INSTRUCTIONS (HEAD EXPANDER)
A.
Make a pencil mark
FROMTHETOPOFTHE
window on the room side edge of each jamb.
B.
Install the head expander on the top of the
window frame.
3LIDETHEEXPANDERDOWNONTO
the head as far as it will go.
Note: To determine if the Head Expander is required refer to Step 4B.
*OUFSJPSGSBNFFEHF
)FBEFYQBOEFS
5PQXJOEPXGSBNF
4JEF7JFX
C.
Test fit the window
into the opening.
3LIDETHEHEADEXPANDERUPUNTILTHETOP
OFTHEHEADEXPANDERISWITHINOF
THETOPOFTHEEXISTINGOPENING%NSURE
the pencil marks are not visible. If the
PENCILMARKISVISIBLETHEEXPANDERIS
EXTENDEDTOOFAR
Note: If the expander extends past
the pencil mark it may be necessary
to shim the original sill or to order a
larger window.
D.
Drill two 1/16" pilot holes
THROUGHTHEROOMSIDELEGOFHEADEXPANDERINTOTHEFRAME4HESE
HOLESARETOBEFROMEACHENDOFTHEHEADEXPANDER)NSERTAXPANHEADSHEETMETAL
SCREWNOTPROVIDED INTOEACHHOLE
*OUFSJPSGSBNFFEHF
1FODJMNBSL
)FBEFYQBOEFS
CLEANING INSTRUCTIONS
2EMOVELABELSANDCLEANTHEGLASSUSINGASOFTCLEANGRITFREECLOTHANDMILDSOAPORDETERGENT"ESURE
to remove all liquid by wiping dry or use a clean squeegee. The vinyl frame may be cleaned as described
ABOVE&ORSTUBBORNDIRTAhNONABRASIVEvCLEANERSUCHAS"ON!MI
®
or Soft scrub
®
may be used. Do
NOTUSESOLVENTSSUCHASMINERALSPIRITSTOLUENEXYLENENAPHTHAORMURIATICACIDASTHEYCANDULLTHE
lNISHSOFTENTHEVINYLANDORCAUSEFAILUREOFTHEINSULATEDUEEPDOORTRACKSCLEAROFDIRTAND
debris. Keep weep holes open and clear of obstructions.
E.
Proceed to Step 4D.
