PELICAN
TM
SabreLite
TM
2020
Recoil LED
TM
OPERATING INSTRUCTIONS
CATALOG #2020
23215 Early Ave. • Torrance, CA 90505
(310) 326-4700 • FAX (310) 326-3311
www.pelican.com
SabreLite
TM
2020
Recoil LED
TM
OPERATING INSTRUCTIONS CATALOG #2020
BATTERY INSTALLATION
1. Remove lens housing by turning counter-clockwise.
2. Remove the LED module.
3. Remove the battery tray.
4. Remove used batteries and replace with fresh batteries in the
tray as shown by the polarity icons molded into the base of
the tray battery.
5. Insert the battery tray into the flashlight with the two metal
tabs facing outwards.
6. Replace the LED module.
7. Replace lens housing squarely on threads and turn clockwise
while pressing on the lens housing slightly.
ON/OFF
Turn the lens housing clockwise until light activates.
To turn light off, back lens housing off counter-clockwise until
light goes off. Continue to back off for approximately 1 full turn
to eliminate possibility of light activating accidentally in storage.
DO NOT OVERTIGHTEN.
O-RING MAINTENANCE
Check closely for cuts, scratches, or otherwise damaged O-ring
or mating lens lip surface. Remove any dirt or foreign matter
from O-ring sealing surfaces. Keep threads, O-ring groove and
inside lip of lens lubricated with silicone grease. See Warranty
information for replacement of O-ring.
PRODUCT SPECIFICATIONS
Lamp Type:
LED
Battery Type:
E93 1.5V Alkaline C-cell (3)
Battery Brand:
Eveready
®
Energizer
®
REPLACEMENT PARTS
2001
O-ring
Battery Safety Bulletin Alakline Batteries
1. Hazardous location safety approvals for explosive environ-
ments are only valid for the specified cell type manufacturer
and, where applicable, brand names that are displayed on
the flashlight and/or instructions sheets that are supplied
with the light.
2. The use of other battery technologies may reduce the
performance of the the flashlight. Always read the battery
manufacturers recommendations for the appropriate use
of the battery technology/brand prior to using them in the
flashlight.
3. When replacing the batteries:
a. Replace all the batteries at the same time.
b. Do not mix battery brands and old and new batteries.
c. Always insert batteries correctly with regard to polarity
(+ and -) marked on the battery and equipment.
4. Do not change batteries in a hazardous location.
5. Remove batteries from equipment if it is not to be used for
an extended period of time.
CAUTION: Read This Notice Before Use.
Pelican Products assumes no liability for any brand batteries which are
defective or cause injury to anyone when used in any Pelican flashlight.
DO NOT MODIFY THIS PRODUCT!
PELICAN LEGENDARY FULL LIFETIME GUARANTEE OF
EXCELLENCE
Pelican Products, Inc. guarantees its lights for a lifetime against
breakage or defects in workmanship. This guarantee does not
cover the lamp or batteries (rechargeable or alkaline).
Pelican will either repair or replace any defective product, at our
sole option. THE REMEDIES HEREBY PROVIDED SHALL BE
THE EXCLUSIVE AND SOLE REMEDY OF THE PURCHASER.
TO THE EXTENT PERMITTED BY LAW, IN NO EVENT SHALL
PELICAN BE LIABLE FOR ANY INDIRECT, PUNITIVE, INCIDENTAL
OR CONSEQUENTIAL DAMAGES, OR SPECIAL DAMAGES,
REGARDLESS OF WHETHER A CLAIM FOR SUCH
DAMAGES IS BASED ON WARRANTY, CONTRACT,
NEGLIGENCE OR OTHERWISE. In no event shall Pelican’s
liability to the purchaser for damages hereunder exceed the pur-
chase price of the product in respect of which damages are claimed.
To make a warranty claim, the purchaser must contact Pelican
Products, Inc. at 23215 Early Avenue, Torrance, CA 90505 or
[email protected]. Any warranty claims shall be made by the
purchaser as soon as practicable. The purchaser must obtain a
return authorization number from Pelican Customer Service prior to
returning any product. In the event that Pelican determines that any
returned product is not defective, within the terms of this warranty,
the purchaser shall pay Pelican all costs of handling, transportation
and repairs at Pelican’s prevailing rates.
All warranty claims of any nature are barred if the flashlight
has been altered, damaged or in any way physically changed, or
subjected to abuse, misuse, negligence or accident.
Some states do not allow the exclusion or limitation of incidental or
consequential damages, so the above limitation or exclusion may
not apply to you. This warranty gives you specific legal rights, and
you may have other rights which vary from state to state.
Lifetime Guarantee does not cover Roto Molded or AALG
products.
Refer to www.pelican.com/warranty for full details.
2023-311-000 5-1330 Rev B © 2011 Pelican Products FE/11
Product of the USA. Assembled in the US with US and foreign components
All trademarks are registered and/or unregistered trademarks of
Pelican Products, Inc., its subsidiaries and/or affiliates.
Energizer is a registered trademark of Eveready Battery Company, Inc.
PELICAN
TM
PRODUCTS
23215 Early Avenue • Torrance, California 90505 USA
Tel 310.326.4700 • FAX 310.326.3311 • www.pelican.com
PELICAN
TM
CANADA
10221-184 St. • Edmonton, Alberta T5S 2J4
Tel 780.481.6076 • FAX 780.481.9586
PELI
TM
PRODUCTS, S.L.U.
c/ Provença, 388, 7º • 08025 · Barcelona, Spain
Tel: +34 934 674 999 • Fax: +34 934 877 393
SabreLite
TM
2020
Recoil LED
TM
INSTRUCCIONES DE FUNCIONAMIENTO #CAT. 2020
INSTALACIÓN DE LAS PILAS
1. Retire el bastidor de lente girándolo en sentido
contrario a las agujas del reloj.
2. Retire el módule de LED.
3. Retire la bandeja de pilas.
4. Retire las pilas usadas y coloque las pilas nuevas en la
bandeja teniendo en cuenta la polaridad como se muestra
en la ilustración impresa en la base de la bandeja.
5. Inserte la bandeja de pilas en la linterna con las dos piezas
metálicas apuntando hacia afuera.
6. Vuelva a colocar el módule de LED.
7. Vuelva a colocar el bastidor de la lente sobre la rosca y
gire en el sentido de las agujas del reloj al mismo tiempo
que ejerce un poco de presión sobre el mismo.
ENCENDIDO / APAGADO
La luz se enciende girando el bastidor de el lente en el sentido
de las agujas del reloj. Para apagarla, gire en sentido opuesto
hasta que se apague la luz. Siga girando aproximadamente
una vuelta completa para eliminar la posibilidad de que la
luz se encienda por error al estar guardada. NO APRIETE
DEMASIADO.
MANTENIMIENTO DE LA JUNTA TÓRICA
Inspeccione atentamente la junta tórica y la superficie del labio
de contacto de el lente en busca de cortes, arañazos u otro
tipo de daños. Limpie cualquier suciedad o cuerpo extraño de
las superficies de contacto de la junta tórica. Mantenga las
roscas, la ranura de la junta tórica y el labio interior de el lente
lubricados con grasa de silicona. Consulte en la Garantía la
información sobre sustitución de la junta tórica.
