©
2019
Enviro Water Solutions, Inc.
3060 Performance Circle, Suite 2, DeLand, FL 32724
Figure 2
Note
: If your tank has a removable riser tube, when removing the expired media from the tank the
riser tube inside the tank will be flushed out of the tank along with the expired media. If this occurs, pull
the tube all the way out and put it aside until the expired carbon media is fully removed from the tank.
If the riser tube does not come out during the above process, disregard this note and skip to step 5.
Figure 3
4.
Once the expired media is removed, re
install
the riser tube inside the tank with the attached lower
basket on the bottom and the open tube facing up.
5.
The riser tube will rest in the center of the bottom of the tank. Cover the top of the riser tube with
the provided
red
cap
,
then pour
the
media replacement into the tank with th
e provided funnel
.
6.
Once the media is replaced, r
emove the
red
cap from the
top
of the riser tube
, remove the old
existing Head O-
R
ing and replace with the new lubricated Head O-
R
ing
and fit the riser
tube into
the bottom of the
upper basket attached to the head.
7.
Push down to screw the head back onto the tank hand-tight.
Upper Basket
Head
Riser Tube
Tank
Blue
Funnel
Red
Cap
Head
Tank
Tank
Riser Tube
Riser Tube
*
Head & Upper
B
asket
are to remain attached
Upper Basket
Head O-
R
ing
PC600
-R / PC
1000
-R,
Rev
E
—
Pelican PC600/PC1000
Replacement Media
P
elican
W
ater.com
(877) 842-1635
