The water softener must be set in two
ways: manually, using the water hard-
ness dial and electronically.
Water hardness
Adjusting the water hardness setting
Use of
salt
°dH
°TH
mmol/l
manually
electronically
51 - 70
91 - 125
9,1 - 12,5
2
level 10
yes
43 - 50
76 - 90
7,6 - 9,0
2
level 9
yes
37 - 42
65 - 75
6,5 - 7,5
2
level 8
yes
29 - 36
51 - 64
5,1 - 6,4
2
level 7
yes
23 - 28
40 - 50
4,0 - 5,0
2
level 6
yes
19 - 22
33 - 39
3,3 - 3,9
2
level 5
yes
15 - 18
26 - 32
2,6 - 3,2
1
level 4
yes
11 - 14
19 - 25
1,9 - 2,5
1
level 3
yes
4 - 10
7 - 18
0,7 - 1,8
1
level 2
yes
< 4
< 7
< 0,7
1
level 1
no
Setting manually
The dishwasher is factory set at position
2.
1. Open the dishwasher door.
2. Remove the lower basket from the dish-
washer.
3. Turn the water hardness dial to position
1 or 2 (see chart).
4. Replace the lower basket.
Setting electronically
The dishwasher is factory set at level 5.
1. Press the On/Off button. The dishwasher
must be in setting mode.
2. Simultaneously press and hold function
buttons
B
and
C
, until the lights of func-
tion buttons
A
,
B
and
C
start flashing.
3. Press function button
A
, the lights of
function buttons
B
and
C
go off while the
light of function button
A
continues to
flash. Simultaneously the
End
indicator
light starts to flash and a sequence of in-
termittent audible signals are heard.
The current level is indicated by the num-
ber of flashes of the
End
indicator light
together with a sequence of intermittent
audible signals with a pause of a few sec-
onds.
Examples:
5 flashes / 5 intermittent audible signals -
pause - 5 flashes / 5 intermittent audible
signals - pause, etc. = level 5
6 flashes / 6 intermittent audible signals -
pause - 6 flashes / 6 intermittent audible
signals - pause, etc. = level 6
4. To change the level, press function but-
ton
A
. Each time the button is pressed
the level changes. (For the selection of the
new level see the chart).
Examples:
If the current level is 5, by
pressing function button
A
once, level 6
is selected.
If the current level is 10, by pressing func-
tion button
A
once, level 1 is selected.
5. To memorize the operation, switch off the
dishwasher by pressing the On/Off but-
ton.
Use of dishwasher salt
Warning!
74
