17
Owner’s manual
EN
6. AV cable plug
7. Camera’s AV signal output
8. Camera
9. Camera’s power input
10. Power cable plug (camera)
11. Power 12 V (red) (camera)
12. GND (black) (camera)
13. Power 12 V (red) (control unit)
14. GND (black) (control unit)
15. Power cable plug (control unit)
16. Buzzer
17. Sensors
18. Control unit
IMPORTANT:
1. when connecting the sensors to the control unit, keep in
mind that sensor that will be located on the left side of the
vehicle must be connected to socket marked as A or B; while
sensor on the right side of the vehicle must be connected to
socket marked as C or D. Such way of connection guarantees
proper display of obstacle’s position on the screen.
2. If the sensors have been connected properly, the buzzer will
issue a short sound signal, which means proper operation.
Note: when in condition as presented below, sensors’ operation
will be distorted.
