2
SPECIFICATIONS
Model
PY-2H30R
RMS [email protected]
Power @ 4 Ohms 200W x 2
Power @ 2 Ohms 300W x 2
Bridged Power @ 4 Ohm 500W x 1
Min. Speaker Impedance 2 Ohm
THD Distortion 0.08%
IMD Distortion 0.08%
Frequency Response 20Hz~20KHz
Input Sensitivity 200mV~6V
Input Impedance 15K
Signal-to-Noise Ratio 90 dB
Channel Separation 50 dB
Remote Bass Control 0dB~+12dB
Crossover Network
Low Pass Filter 45Hz~300Hz
Bass Boost 0dB~+12dB
High Pass Filter 45Hz~300Hz
Fuse Rating 30A x 2
Size L x W x H 510 x 245 x 60mm
CD PLAYER
SEL
ELECTRICAL CONNECTION
Connect to chassis
ground of vehicle*
Connect to remote
turn-on lead of
source unit.
Connect to +12V of battery with
appropriate FUSE value.
+12V
Anode of power connection terminals. Connect to the anode of car battery.
REM
Terminal to be connected with Remote cable, which comes from the source and which
controls the amplifier switching on. Applied voltage must be between 7 and 15 VDC.
GND
Ground terminal. Connect to the car chassis. Keep the length of the ground cable
to a minimum.
