Paul Hochköpper GmbH & Co. KG
Postfach 1727 • D-58467 Lüdenscheid • Tel.: +49 (0)2351 185-0 • Fax: +49 (0)2351 27666 • e-mail: [email protected] • Internet: www.peha.de
GB - 2
452 FU EP JR o.T. (Rev04_090225)
126291-03
6. Operation and functions
6.1 Operating
The receiver is operated with Easyclick transmitters (radio
signal). Before use, the transmitters must be assigned to
the receiver (max. 32 receivers). The receiver‘s Function 1
is preset after assigning a transmitter to the receiver. It can
be changed by function programming. Every transmitter
can control an unlimited number of receivers.
6.2 Easyclick wall transmitters
6.2.1 Function 1 (Two-button operation)
Note:
Standard function after assigning a transmitter!
6.2.2 Function 2 (One-button operation)
6.2.3 Function 3 (Button control))
Taste AUF
Taste AB
Taste O
Taste I
Wall transmitter
Function
Press button UP
or
DOWN
briefly
UP, DOWN or STOP (blade
adjustment for blinds)
Press button UP
or
DOWN
long
Continuous operation
UP / DOWN (parameter)
Parameters
1
120 sec running time
2
10 sec running time
3
30 sec running time
4
60 sec running time
5
5 min running time
6
10 min running time
7
60 min running time
Wall transmitter
Function
Press button UP
or DOWN
Continuous operation
UP / DOWN (parameter)
Parameters
1
120 sec running time
2
10 sec running time
3
30 sec running time
4
60 sec running time
5
5 min running time
6
10 min running time
7
60 min running time
6.2.4 Function 4 (Automatic mode)
Already integrated for future applications! Activating au-
tomatic mode opens up options for using the receiver in
combination with a sun sensor (Point 6.2.6) .
6.2.5 Function 5 (Interlock)
The locking of roller shutters / blinds serves f.ex. the secu-
rity during maintenance work. An activation of the lock is
carried out through a wall transmitter or through a window
contact when the terrace door is open.
6.2.6 Function 6 (Sun sensor)
Already integrated for future applications! Switch on auto-
matic mode (see Point 6.2.4).
Notes:
– Please follow the sun sensor’s instructions.
– The „UP“ function during the „OFF“ signal of the sun
sensors is especially recommendable for sunblinds!
6.2.7 Function 7 (Scenes))
With this function, set positions of the roller shutters / blinds
(scenes) can be stored and called up again.
7.
Troubleshooting & remedies
7.1
New system or existing system
•
Check power supply (electrician only).
•
Check connected electrical loads.
•
Check the system’s surroundings for changes that could
cause interference (e.g. metal cabinets, furniture or walls
which have been moved).
•
If the transmitter/receiver operates at a reduced distance,
the radio signal was encountering interference or it was
operating outside the transmission range.
•
Use the receiver at a better location.
•
Delete all transmitters and reprogram the receiver.
7.2
Receiver switches by itself
•
This may be caused by operation of an external trans-
mitter that was coincidentally assigned to the receiver.
•
Delete all transmitters and reprogram the receiver.
7.3 Radio signal range limitations
•
Use of the receiver in the vicinity of metal objects or
materials with metal components.
Maintain a distance of at least 10 cm.
•
Moist materials.
•
Devices which emit high-frequency signals (e.g. audio
and video systems, computers, electronic ballasts in
light fixtures). Maintain a distance of at least 0.5 m.
7.4 Contact
Telephone:................ +49 (0)2351 185-0
Fax:.......................... +49 (0)2351 27666
Internet:.................... www.peha.de/contact.aspx
E-mail:...................... [email protected]
Wall transmitter
Function
Press button UP
or DOWN
UP or DOWN (blade adjust-
ment for blinds)
Release button UP
or DOWN
STOP
Parameters
1
120 sec running time
2
10 sec running time
3
30 sec running time
4
60 sec running time
5
5 min running time
6
10 min running time
7
60 min running time
Wall transmitter
Function
Press button DOWN
or
I
Automatic mode on
Press button UP
or
O
Automatic mode off
Parameters
1
Sun mode
Magnet
max. 5mm
PEHA window contact
(450 FU FK)
Learn mode
Assign / delete window contact with its program button.
Function programming
(transmitter detection)
Activate the window contact once with the magnet.
Function setting
(e.g. function 5)
LRN/SET button 5
x activated
LED blinks 5 x orange
function 5
Parameter
setting
(e.g. parameter 2)
LRN/SET button
2
x activated
LED blinks 2 x green
parameter 2
Sun sensor Function
On signal
DOWN (1 s blade adjustment for blinds)
Off signal
UP
Parameters
1
10 sec running time
2
13 sec running time
3
16 sec running time
4
20 sec running time
5
25 sec running time
6
30 sec running time
7
40 sec running time
Wall transmitter
Function
Press button DOWN
or
I
UP and interlock
Press button UP
or
O
Unlocking
Window contact
Function
Opened
Interlock
Closed
Unlocking
Parameters
1
Wall transmitter safety function
2
Window contact safety function
Application example: scene
A scene can be adjusted by using a transmitter and an
available control (various receivers with assigned trans-
mitters).
Programming
Assign the transmitter to each receiver, program func-
tion 7 and set parameter.
Store scene (A-D)
•
Set required positions of roller shutters/blinds.
•
Press button
/I or
/
O of the transmitter
for longer than 2s.
Select scene (A-D)
Press briefly the button
/I or
/
O of the transmitter.
Wall transmitter
Function (parameter)
Press button
/ O
briefly
Switch on scene A/C
Press button
/ O long
Store light A/C
Press button
/ I
briefly
Switch on scene B/D
Press button
/ I long
Store light B/D
Parameter
1
button
/
O = scene A, button
/ I = scene B
2
button
/
O = scene C, button
/ I = scene D
