Peha Elektro GmbH & Co. KG
Postfach 1727 • D-58467 Lüdenscheid • Tel.: +49 (0)2351 185-0 • Fax: +49 (0)2351 27666 • e-mail: [email protected] • Internet: www.peha.de
GB - 2
452-24 FU EP JR o.T. (Rev01_110112)
126471-01
6.2.1 Function 1 (Two-button operation)
Note:
Standard function after assigning a transmitter!
6.2.2 Function 2 (One-button operation)
6.2.3 Function 3 (Button control)
6.2.4 Function 4 (Automatic mode)
Already integrated for future applications! Activating au-
tomatic mode opens up options for using the receiver in
combination with a sun sensor (Point 6.2.6) .
6.2.5 Function 5 (Interlock)
The locking of roller shutters / blinds serves f.ex. the secu-
rity during maintenance work. An activation of the lock is
carried out through a wall transmitter or through a window
contact when the terrace door is open.
Wall transmitter
Function
Press button UP
or
DOWN
briefly
UP, DOWN or STOP (blade
adjustment for blinds)
Press button UP
or
DOWN
long
Continuous operation
UP / DOWN (parameter)
Parameters
1
120 sec running time
2
10 sec running time
3
30 sec running time
4
60 sec running time
5
5 min running time
6
10 min running time
7
60 min running time
Wall transmitter
Function
Press button UP
or DOWN
Continuous operation
UP / DOWN (parameter)
Parameters
1
120 sec running time
2
10 sec running time
3
30 sec running time
4
60 sec running time
5
5 min running time
6
10 min running time
7
60 min running time
6.2.6 Function 6 (Sun sensor)
Already integrated for future applications! Switch on auto-
matic mode (see Point 6.2.4).
Notes:
– Please follow the sun sensor’s instructions.
– The „UP“ function during the „OFF“ signal of the sun
sensors is especially recommendable for sunblinds!
6.2.7 Function 7 (Scenes)
With this function, set positions of the roller shutters /
blinds (scenes) can be stored and called up again.
7. Range
The strength of the radio signal between the transmitter
and switching receiver weakens as distance increases.
The range can be further reduced by different materials
or interference sources in the propagation direction of the
radio waves. The range can be increased by the use of
Easyclick Repeaters (radio amplifiers).
Note:
Go to www.peha.de for further information on “Range”.
8. Troubleshooting & remedies
8.1 New system or existing system
• Check power supply (electrician only).
• Check connected electrical loads.
• Check the system’s surroundings for changes that could
cause interference (e.g. metal cabinets, furniture or walls
which have been moved).
• If the transmitter/receiver operates at a reduced distance,
the radio signal was encountering interference or it was
operating outside the transmission range.
• Use the receiver at a better location.
• Delete all transmitters and reprogram the receiver.
8.2 Receiver switches by itself
• This may be caused by operation of an external trans-
mitter that was coincidentally assigned to the receiver.
• Delete all transmitters and reprogram the receiver.
8.3 Radio signal range limitations
• Use of the receiver in the vicinity of metal objects or
materials with metal components.
Maintain a distance of at least 10 cm.
• Moist materials.
• Devices which emit high-frequency signals (e.g. audio
and video systems, computers, electronic ballasts in
light fixtures). Maintain a distance of at least 0.5 m.
8.4 Contact
Telephone:................ +49 (0)2351 185-0
Fax:.......................... +49 (0)2351 27666
Internet:.................... www.peha.de
E-mail:...................... [email protected]
9. Conformity declaration
PEHA products may be sold and operated in EU countries
as well as in CH, IS and N. PEHA herewith declares that
the receiver (452/24 FU-EP JR o.T.) is in compliance with
the fundamental requirements and other relevant provisi-
ons of R&TTE Directive 1999/5/EC.
The conformity declaration is available on the Internet at
the following address: www.peha.de
Wall transmitter
Function
Press button UP
or DOWN
UP or DOWN (blade adjust-
ment for blinds)
Release button UP
or DOWN
STOP
Parameters
1
120 sec running time
2
10 sec running time
3
30 sec running time
4
60 sec running time
5
5 min running time
6
10 min running time
7
60 min running time
Wall transmitter
Function
Press button DOWN
or
I
Automatic mode on
Press button UP
or
O
Automatic mode off
Parameters
1
Sun mode
Magnet
max. 5mm
PEHA window contact
(450 FU FK)
Learn mode
Assign / delete window contact with its program button.
Function programming
(transmitter detection)
Activate the window contact once with the magnet.
Function setting
(e.g. function 5)
LRN/SET button 5 x activated
LED blinks 5 x orange
function 5
Parameter setting
(e.g. parameter 2)
LRN/SET button 2 x activated
LED blinks 2 x green
parameter 2
Sun sensor Function
On signal
DOWN (1 s blade adjustment for blinds)
Off signal
UP
Parameters
1
10 sec running time
2
13 sec running time
3
16 sec running time
4
20 sec running time
5
25 sec running time
6
30 sec running time
7
40 sec running time
Wall transmitter
Function
Press button DOWN
or
I
UP and interlock
Press button UP
or
O
Unlocking
Window contact
Function
Opened
Interlock
Closed
Unlocking
Parameters
1
Wall transmitter safety function
2
Window contact safety function
Application example: scene
A scene can be adjusted by using a transmitter and an
available control (various receivers with assigned trans-
mitters).
Programming
Assign the transmitter to each receiver, program func-
tion 7 and set parameter.
Store scene (A-D)
• Set required positions of roller shutters/blinds.
• Press button
/I or
/
O of the transmitter
for longer than 2s.
Select scene (A-D)
Press briefly the button
/I or
/
O of the transmitter.
Wall transmitter
Function (parameter)
Press button
/ O briefly
Switch on scene A/C
Press button
/ O long
Store light A/C
Press button
/ I briefly
Switch on scene B/D
Press button
/ I long
Store light B/D
Parameter
1
button
/
O = scene A, button
/ I = scene B
2
button
/
O = scene C, button
/ I = scene D
Material
Reduction
Wood, plaster, non-coated glass
0 - 10%
Masonry, wood/plaster walls
5 - 35%
Reinforced concrete
10 - 90%
Range
Conditions
> 30 m
Under good conditions (large, clear
space without obstructions).
> 20 m
Through up to 5 plaster/drywall board
walls or 2 brick/porous concrete walls
(furniture and persons in the room):
For transmitter and receiver with good
aerial positioning/layout.
> 10 m
Through up to 5 plaster/drywall board
walls or 2 brick/porous concrete walls
(furniture and persons in the room):
For receivers installed in walls or cor-
ners of rooms, receivers with internal
aerial or narrow corridors.
Through 1-2
ceiling / wall
Depending on ceiling/wall armouring
and type of aerial in the receiver.
