Assembling instructions (4S4528) Waterfall Square Wall Union
1)
Screw the nipple to the connection of the wall.
2)
Insert the wall union on the nipple.
3)
Use the allen key for fixing the wall union.
4)
Connect shower hose to wall union.
1.
2.
3.
Overall Dimensions
Water Regulations Requirements:
It is important to ensure that the water supplies to your shower are connected in accordance with the water
regulations (WRAS) requirements and good plumbing practice.
Bylaw 17 (2) B
The shower head of any shower hose pipe should be fitted by a fixed or sliding attachment so that it can only be
discharged at a point not less than 25mm above the spill-over level of bath tray or fixed appliance.
PLEASE NOTE:
The correct type of wall fittings are used to ensure ridgity of the slider rail, ridged riser, fixed head shower or
wall union. The correct plumbing fittings and connections must be used to install the ridgid riser rails, shower heads
and wall unions.
Slider Rails are not safety grab rails. Special safety grab rails can be purchased form Pegler ref: No: 4S4531 / 4S4532.
