Controller can auto adjust the heater power levels by consulting the
environmental sensor Dew Point reading. Just click “Auto” and leave to
Pocket
Powerbox to decide if it is time to turn on and precise tune the
level of your dew heaters.
ASCOM 6 Fully supported
Pocket powerbox fully supports ASCOM6. In combination with our main
program which acts as a server you can use our latest ASCOM 6.3
supplied drivers to:
Pass environmental settings to supported software (e.g Sequence
Generator Pro / MaximDL )
(ASCOM ObservingConditions)
Switch ON or OFF all 12V outputs.
(ASCOM Switches)
INDI Fully supported
Pocket powerbox fully supports INDI, Bundle it with Stellarmate or any
other device that can use INDILib.
Led Indications for power and failure states
Led can blink in patterns to warn you regarding important power
issues (e.g over or under voltage). Moreover light can be turned off
using the software. Our led is very dim but in case you don’t like it on
you can switch it off via the software.
Power Cables are included in the package
Four power cable of DC 2.1mm to 2.1mm male (1m) are included
included in the
package.
!
