7 Pegasus Astro
– Copyright 2021
Motor Mode Selection
By its unique design controller can support two motor modes. The motor selection can be achieved
inside the standalone software
•
Click the drop-down menu of the
Motor Mode
(image below). Software will ask you to switch
to selected mode (Stepper Motor or DC Motor)
Mode can be changed only from the software.
Status Led
A dual colour LED is fitted on the top of the unit. It can light in yellow or green colour. The light displayed
by the led indicated the status of the device.
Permanently Green Light
Controller Start-up
Permanently Green Light
Knob encoder set to normal speed
Permanently Yellow Light
Knob encoder set to 1/10 speed
Permanently Off
Controller not operational or LED switched
off from software
